Giesse Panic Exit
GIESSE presents a complete range of panic exit devices for emergency exist, featuring high reliability, and an ergonomic and innovative design, which combines perfectly the requirements of safety and facility of use with good looks.
GIESSE presents a complete range of panic exit devices for emergency exist, featuring high reliability, and an ergonomic and innovative design, which combines perfectly the requirements of safety and facility of use with good looks.
Giesse Carrera 2 Adjustable Pulley (03125)
CARRERA2 adjustable pulley with two rollers for heavy aluminium sliding doors and windows.
CARRERA2 adjustable pulley with two rollers for heavy aluminium sliding doors and windows.
Domina HP
Function:
Two-handed hinge for aluminium doors with three-way adjustment. 2 leaf version, C/C distance 62.5, rise 20.
Technical Features:
Hinge with front application for the...
Function:
Two-handed hinge for aluminium doors with three-way adjustment. 2 leaf version, C/C distance 62.5, rise 20.
Technical Features:
Hinge with front application for the realization of doors with door profile. Interchageable with DOMINA 3D hinge. Max. load capacity in compliance with EN1935 standard. Adjustable in 3 directions with door installed. The adjustments are micrometric and do not interfere with each other. Side adjustment: ±2.5mm. The side adjustment is made operating directly on the side adjustment screw, using a 4mm Allen wrench. Compression adjustment: +0.5mm. This is carried out by regulating the MX bushing with the relevant adjustment screw art. 05053. The MX cover blocks the pressure adjustment, while still enabling the height adjustment. Vertical adjustment: 0/4mm. This is carried out by positioning the grub screw positioned on the bottom of the MX hinge by means of a 6mm Allen key, with MX cover fitted (to block pressure adjustment). At the end of the adjustment phase, the fitting of the MX cover guard guarantees the maintenance of the height adjustment.
Giesse Brio Plus Handle with Internal Key (02883)
Recessed two-handed handle, with manual operation (for doors) enabling side locking of sliding wings. The article enables crossing and overlapping of the two wings in opening.
Recessed two-handed handle, with manual operation (for doors) enabling side locking of sliding wings. The article enables crossing and overlapping of the two wings in opening.
Giesse Varia Multipoint
Varia Multi is an innovative system designed by Giesse to provide large motorized bottom-hung windows with guaranteed seal, and therefore safety. Applicable to all series of profiles referable to the profile pair crosssections shown at the...
Varia Multi is an innovative system designed by Giesse to provide large motorized bottom-hung windows with guaranteed seal, and therefore safety. Applicable to all series of profiles referable to the profile pair crosssections shown at the side.
Giesse Flash Base
RH/LH hinge for aluminium frame open joint doors and windows. It features the same reliability and precision as conventional GIESSE hinges and is fitted to the frame extremely quickly, even if the frame has already been assembled.
• FLASH ...
RH/LH hinge for aluminium frame open joint doors and windows. It features the same reliability and precision as conventional GIESSE hinges and is fitted to the frame extremely quickly, even if the frame has already been assembled.
• FLASH BASE hinges are supplied ready assembled and feature the GIESSE-RAPID fixing system.
• The special shape of the hinge and fixing plate makes for practical and rapid installation on pre-assembled frames and ensure the hinge remains correctly positioned when the screws are tightened.
Giesse Bridge 2
Two – handed comb hinge, for normal use on aluminium central gasket windows and light doors. It is suitable for installation where there is extra crosswise stress on the pin axis (e.g. on very wide, bottom-hung or projecting frames).
Two – handed comb hinge, for normal use on aluminium central gasket windows and light doors. It is suitable for installation where there is extra crosswise stress on the pin axis (e.g. on very wide, bottom-hung or projecting frames).
Technical Features:
- The BRIDGE 2 hinge is supplied pre – assembed (but without the fixing plates for the frame). The special features of the hinge and plate enable quick and easy fitting on ready-assembled frames and perfect hinge positioning when the screws are being secured.
- BRIDGE 2 has a removable pin, locked in place by a 2.5 mm Allen grub screw, accessible only when the wing is open(burglar-proof). This means that the wing can be separated from the frame without having to disassemble the hinge.
Giesse Unica Cremone (01150/01151)
Two-handed Cremone bolt for central gasket and sliding systems. Handle rotation to 90 and 180 degrees, opening and closing positioning notch.
Technical Features:
• The use of quality die-cast materials and the ...
Two-handed Cremone bolt for central gasket and sliding systems. Handle rotation to 90 and 180 degrees, opening and closing positioning notch.
Technical Features:
• The use of quality die-cast materials and the GIESSE painting system ensure good mechanical quality, uniformity of colour and good resistance to abrasion.
• The UNICA Cremone bolt is two-handed and has a centre-to-centre of 104mm.
• To be used in conjunction with the following special closing kits for the type required: Inward opening, Outward opening, Tilt and Turn and Sliding.
• UNICA is supplied without internal components. These components, included in the custo, isation kit are easy and quick to install. This operation is done by the installer.
• The kits for use in conjunction with the Unica consist of the Cremone bolt internal components and those required for the fastener.
Giesse Unica external kit fork slider
Two – handed (R/L) two-way cremone with positioning notch on opening (90⁰) and closing (0⁰). The pull handle rotates through 90⁰.
Two – handed (R/L) two-way cremone with positioning notch on opening (90⁰) and closing (0⁰). The pull handle rotates through 90⁰.
Giesse OS Operator
The standard OS Operator is non-handed and can be used for both casement and awning windows. It is 725 mm (28 ½” inches) long and includes a locking point at each end. For smaller windows, a handed, 466,5mm (18 ¾” inches) version with only 1 locking po...
The standard OS Operator is non-handed and can be used for both casement and awning windows. It is 725 mm (28 ½” inches) long and includes a locking point at each end. For smaller windows, a handed, 466,5mm (18 ¾” inches) version with only 1 locking point is available.
How It Works:
- GIESSE’s innovative design begins with a cremone handle and mechanism that are mounted to the frame. The mechanism includes a movement arm, a gear to transfer movement, and attached locking pawls. Keepers are attached to an integral groove in the vent.
- At 0⁰, the window is closed and the locking points are secured. When the cremone is turned, the locking points release in the first 60⁰ of handle rotation. During the next 120⁰ of movement, the mechanism pushes the sash to the maximum opening based on the arm length. As the cremone rotates back to the closed position, the mechanism brings the event back to the frame and engages the locking points.